Deep cycle lithium battery pack 12V 100Ah
High safety
Long cycle life
Smaller and lighter
No memory effect
Environmental friendly
Maintenance Type: Free
High power, no pollutions
CE, UL, ROHS, BV, SGS, ISO9001, TS16949
Oversea market: Europe, south America, Middle East, etc
Application: UPS, solar/wind system, energy storage, e-tool
Basic Specification:
Rated voltage: 12V
Rated capacity: 100Ah
Standard charge current: 50A
Standard discharge current: 50A-100A
Charge method: CC&CV
Weight: About 14kg
Characteristics:
1. Extremely safe: The chemical structure of LiFePO4 is very stable BMS or PCB built inside to protect the battery over charge and discharge.
2. Long life-cycle: 5~7 years / 2000 times cycle life.
3. Lighter and smaller: 1/3 weight of lead acid battery, 70% size/weight of Ni-MH/Ni-Cd battery.
4. Wide operating temperature: High temperature resistance(-20~70 degrees Celsius).
5. Steady performance: High power output, 1C continuous, 3C pulse for normal cells Low self-discharge rate, less than 3% monthly.
6. No memory effects and highly efficient charge: It can be recharged anytime, no reduction of the capacity
7. Green product: Environment friendly, clean and green energy, no pollution on our environment.
8. Quality assurance: BV and SGS approved supplier, with TS16949 and ISO9001 quality management certificates and UL, CE, IEC62133 etc...Product certificates.
Quality features of OPTIMUM LiFePO4 battery pack
In optimum, each cell and pack is produced with the principle "conformity in 8 aspeacts and 3 inspections in 3 stages", the high stability and reliability can be guaranteed.
"Conformtity in 8 aspects" is a principle developed by OPTIMUM engineers in production and inspection process. The application of it ensures conformity of packs and improves service term of pack obviously.
Confirmity in 8 aspects principle
Conformity in capacity
2...Conformity in impedance
3. Conformity in self-discharging
4. Confirmity in voltage (soc)
5. Confirmity in discharge stage
6. Confirmity in Charge CC ratio
7. Confirmity in cycle life
8. Conformity in batch number
3 inspections in 3 stages
Battery assembly, paralleled modules, finished packs
Model
|
OPT-P12100
|
Case material
|
steel case for single cells
|
Standard capacity(0.2C5A)
|
100Ah
|
Rated voltage
|
12V
|
Max.Charge voltage
|
14.6V
|
Cut-off voltage
|
10V
|
Standard Charge current
|
50A
|
Max. constant discharge current
|
90 A
|
Thickness (Max)
|
170mm
|
Length (Max)
|
330mm
|
Width (Max)
|
220mm
|
Weight (Approx.)
|
About 16kg
|
Impedance (Max, at 1000Hz.)
|
≤50mΩ
|
Charge method
(CC/CV)
|
Standard
|
CC
|
0.2C
|
14.6V cut off
|
CV
|
14.6V
|
0.05C cut off
|
Rapid
|
CC
|
1C
|
14.6V cut off
|
CV
|
14.6V
|
0.05C cut off
|
Operate temperature
|
Charge
|
0°C~45°C
|
discharge
|
-20°C~60°C
|
storage
|
-20°C~45°C
|
Features:
Contains battery protection board(PCM designed inside with the battery pack) to protect pack from short circuit overcharge,over -discharge,over-heating and balancing.
Tags, plugs and connectors are available
Low-resistant and self-discharge
Small size and lightweight
1/3 weight of lead-acid and 65% weight of NiMH
Eco-friendly
Advantages:
With mature technology, standardized design, low long-run cost, environmental friendly, safety and reliability, long lifetime, high output efficiency, excellent low-high temperature performance, low self-discharge, and many patented technologies,
Applications:
Commercial bus and transit,
Solar/Wind Energy Storage System,
Back-Up and UPS System,
Engine Starting Battery
and other power tools.
Introductions:
Founded in 2002, OptimumNanohas been the leading manufacturer of Cylindrical Lithium Iron Phosphate (LiFePO4) Battery in China.With 80,000 sqm factory, 2,000 employees and automation equipment, we could manufacture 150,000 pieces of 32650-3.2V5.5Ah every day.
