G60-12A 12V Car Lead Acid Battery Charger with Battery Meter
-
| Specification |
|---|
| Input: 100~240V |
| Output: 13.8V 3.3A |
| Charge Process: MCU Control, With Recovery Function |
| Charger Indicator: With 20%~100% Battery Fuel Gauge |
| Output Protections: Short-circuit, Reverse Polarity |
| Safety Approval: CE cUL |
| Size: 120 x 67 x 41mm |
| Suit for Battery: 12 Volt 4~40Ah Lead-Acid Battery Charger |
G60-12A is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for lead-acid type battery charging. G60-12A programmed four auto stages (Ud-Im-Uo-Up) charging process, It is designed for all kinds of 12V 7~80Ah lead-acid battery, such as SLA, AGM and Gel battery. Stage "Ud" desulfurating the battery through 18V pulse,When the battery recovered, stage "Im" will give bulk current charging( 3.3A or 2.0A). Then, "Uo" stage is followed, the output voltage is limited on 14.7V; When the battery is nearly full, stage"Up" will turn on duty. At this stage, the battery is charged completely and the charger give some pulse to maintenance the battery.
Further, G60 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G60 will inter protection mode when the battery polarity reversed or the output connectors shorted.
Specification for G60-12A
| Input Voltage | 100-240VAC, 50-60Hz |
| Input Current | 1.1A |
| Back current drain | 1.3mA |
| Charge voltage | Rating 12V, Bulk limited voltage : 14.7V |
| Ripple current | Current-ripple:<= 0.13A rms |
| Bulk charge current | 3.3A for G60-12A, 2.0A for G60-12AS |
| Operate Temperature | -20ºC~50ºC |
| Cooling | Natural convection. Do not cover the charger. |
| Charge principle | Auto 4 stages: Ud-I-Uo-Up |
| Battery type | All types of 12V lead-acid batteries.( SLA, Gel, AGM.) |
| Battery capacity | 7-80Ah for G60-12A, 4~40Ah for G60-12AS |
| Size | 120X67X41mm |
| Enclosure | IP54 (Dust protected, Water splashing resistance) |
| Weight | 270g |
How to use:
1. Connect the AC cord to the socket, The "power" lamp will light on RED.
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, all lamps will flashing, please check the setup.
3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
The table shows the duration of the Bulk stepup to about 80% state of charge.
| Battery type(Ah) | G60-12A(hours) | G60-12AS (hours) |
| 12 | 3 | 5 |
| 22 | 7 | 10 |
| 45 | 14 | 20 |
| 75 | 22 | Not recommend |
For more details, please link Company homepage http://www.green-charger.com/en/.
Green-charger's engineers have dedicated to digital control power products for 13 years, specialize in the design and manufacture many types of NiMH, NiCd, Li-ion and Lead-acid battery charger and battery meter, and also is a professional in the face of high-end clients of the battery charger and battery meter. These products have high performance microprocessor technology to power your battery safely and quickly The main products are battery chargers that can be used in the Electrical-Vehicle, wheelchair, scooters, motorcycles, RC toy, RC flight, mobile light/lamp, LED lamp and many kinds of portable electrical device. The type of chargers have NiMH NiCd charger, lithium battery charger, lead-acid battery charger, LiFePO4 battery charger and so on. All sorts of 5W to 500W power charger all have production, is one of the most professional manufacturers of battery chargers in China.
After many years experiences, Green-charger made a super technology and rich experience of senior R&D engineers. We can develop battery chargers for NiMH, NiCd, Lead-Acid and Li-ion batter pack. The Battery chargers and Battery Management is our produces family also.
Our quality policy is: Providing high reliability of the products, to provide high satisfaction service. We are equipped with the advanced production and kind of test instruments, has the rich RoHS process production management, to ensure that every batch of products satisfy customers. Our products have CCC UL cUL CE VDE CB PSE FC EMC and so on.
We can according to the specific requirements of customers, customized all kinds of non-standard products to meet the needs
