>> Inductor

Ec3542 High Frequency Transformer, Find Details About China Transformer, High Frequency Transformer

Product DescriptionProduct DescriptionFEATURES:-High Power-Low Profile-Inexpensive Type-High Reliability- Low price- Cost-effective- High impedance and low loss-High Conversion Efficiency-Easily Inserted into PCB- RoHS compliance and UL- Custom designs are welcome, Can specify special materials, the

Shenzhen Weishipeng Electronics Co., Ltd. Send Inquiry

Pq2020 Pq2625 Pq3230 Power Isolation High Frequency Transformer

1).Features:Has a strong anti-interference, distributed capacitance, impedance, attenuation of low transmission, firmstructure,can fine-tune the inductance, etc., are widely used in faxmachines, PBX.2). Applicable frequency range: 20 to 100kHz :Operating frequency: higher than 200kHzHigh magnetic fl

Shenzhen Weishipeng Electronics Co., Ltd. Send Inquiry

Toroidal Choke Coil/Power Common Mode Wirewound Inductor Toroidal Inductor

DescriptionProduct description of the Toroidal Choke Coil/Power Common Mode Wirewound InductorSpecifications:1. High frequency2. Low magnetic leakage3. Useful various power coversion and line filter application4. Low radiation noise based on toroidal construction5. Various material available to meet

Shenzhen Weishipeng Electronics Co., Ltd. Send Inquiry

Common Mode Ni-Zn Inductor

Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30%2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Core: T14x9x5 TS10 TDG or EQU2 Wire: UEW polyurethane 130C

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Ni-Zn Common Mode Inductor

Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30%2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Core: T14x9x5 TS10 TDG or EQU2 Wire: UEW polyurethane 130C

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Common Mode Choke Inductor with High Value of Inductance

Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30%2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Core: T14x9x5 TS10 TDG or EQU2 Wire: UEW polyurethane 130C

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Nanocrystalline Core Inductor with High Inductance Value

Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30%2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Core: T14x9x5 TS10 TDG or EQU2 Wire: UEW polyurethane 130C

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Surface Mounted Choke Coil Inductors

Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30%2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Core: T14x9x5 TS10 TDG or EQU2 Wire: UEW polyurethane 130C

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Surface Mounted Common Mode Coil Inductors

Key Specifications/Special Features:-Operating temperature range:-25°C~+110°Cwith rated current-Storage temperature range:-25°C~+110°C-Large permissible D.C. current and low D.C. resistance-PVC Sleeve protects the winding-Tolerance of inductance:3.30μH~39.0μH :±20% (M)47

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Surface Mounted Choke Coil Inductors

Key Specifications/Special Features:-Operating temperature range:-25°C~+110°Cwith rated current-Storage temperature range:-25°C~+110°C-Large permissible D.C. current and low D.C. resistance-PVC Sleeve protects the winding-Tolerance of inductance:3.30μH~39.0μH :±20% (M)47

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Toroidal Choke Coil/Power Common Mode Wirewound Inductor Toroidal Inductor

Product DescriptionProduct description of the Toroidal Choke Coil/Power Common Mode Wirewound InductorSpecifications:1. High frequency2. Low magnetic leakage3. Useful various power coversion and line filter application4. Low radiation noise based on toroidal construction5. Various material available

Shenzhen Weishipeng Electronics Co., Ltd. Send Inquiry

Mpp Core Choke Coil Inductor

WDGWIRESIZETURNSWINDINGInsulationPINInterblockSFN1Φ2.0mm2UEW-B38Ts Ref12Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1)Insulation: Class B(130°C)insulation systems2) Note: This product according to RoHS.3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Cor

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Choke Inductor Magnetic with a Base Bowl Cup Holder

WDGWIRESIZETURNSWINDINGInsulationPINInterblockSFN1Φ2.0mm2UEW-B38Ts Ref12Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH)1)Insulation: Class B(130°C)insulation systems2) Note: This product according to RoHS.3) Hi-pot: N1 to N2: 1500V AC, 3mA, 60sMaterial list:1 Cor

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

10*8mm Radial Power Choke Inductors 2.2mh Used for Electricity Meter

Through Hole Leaded Fixed Radial Power Choke Inductors with -20 to 85°C Operating TemperatureFactory and winding/taping equipments:TypesizeindutcanceLGB-X100810*8mm222K[Features]:High withstanding voltagge and insulation resistance;Available in Shielded and Unshielded types;Magnetic shielding, u

Changzhou Southern Electronic Element Factory Co., Ltd. Send Inquiry

8*10mm-10uh Radial Bead Choke Inductor

8*10mm-10uH Radial bead choke inductorSpecifications1, Axial leaded power inductor2, Radial leaded power inductor3, Leaded inductor with ferrite corePower InductorsFeatures:High withstanding voltagge and insulation resistance;Available in Shielded and Unshielded types;Magnetic shielding, used in hig

Changzhou Southern Electronic Element Factory Co., Ltd. Send Inquiry

3.8uh Axial Ferrite Choke Inductor for Motor Electronic

3.8UH Axial ferrite choke inductor for Motor electronicSpecifications1.Filter Inductor2.Inductance:Measured at 1Khz with no DC current3.Solid soft copper wire4.Pre-tinned lead,polyolefin tube1.High Inductors & inductors*Size:0306~1016*Inductance:1UH~47000UH*Tolerance:+/-10%*Short Lead time2.Features

Changzhou Southern Electronic Element Factory Co., Ltd. Send Inquiry

16uh Axial Ferrite Core Coils Inductor D2rww 3X12

16uH Axial ferrite core coils inductor D2RWW 3X12Specifications1.Filter Inductor2.Inductance:Measured at 1Khz with no DC current3.Solid soft copper wire4.Pre-tinned lead,polyolefin tube1.High Inductors & inductors*Size:0306~1016*Inductance:1UH~47000UH*Tolerance:+/-10%*Short Lead time2.Features a. Pr

Changzhou Southern Electronic Element Factory Co., Ltd. Send Inquiry

68uh Through Hole Axial UL Tube Leaded Power Chokes Inductors

68uH Through Hole Axial UL Tube Power Chokes Inductors with Wire Wound ConstructionSpecifications1.Filter Inductor2.Inductance:Measured at 1Khz with no DC current3.Solid soft copper wire4.Pre-tinned lead,polyolefin tube1.High Inductors & inductors*Size:0306~1016*Inductance:1UH~47000UH*Tolerance:+/-1

Changzhou Southern Electronic Element Factory Co., Ltd. Send Inquiry

Nanocrystalline Core Common Mode Choke Inductor

Features:1. Manufactured by iron-based amorphous material;2. High saturation magnetic induction;3. High magnetic permeability,low coercivity,low loss;4. Open air gap,excellent constant inductance and anti-DC and bias magnetic field ability.Application:High current output filter inductor,Air conditio

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry

Amorphous Core Common Mode Coil Inductor with RoHS Certifications

Features:1. Manufactured by iron-based amorphous material;2. High saturation magnetic induction;3. High magnetic permeability,low coercivity,low loss;4. Open air gap,excellent constant inductance and anti-DC and bias magnetic field ability.Application:High current output filter inductor,Air conditio

XP POWER (CHINA) ELECTRONICS CO., LTD. Send Inquiry