>> Power Inductor

Molding Power Inductor, 100uh, Current: 1.5A for Power Bank & Power Supplier

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 4.7uh, IDC~6.5A, Dcr~0.02ohm Max. Size~7.3*6.8*5.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 4.7uh, IDC=4.2A, Dcr=0.05ohm, Size: 5.5*4.7*2.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 1.0uh, IDC~3A, Dcr~0.043ohm, Size: 2.5*2.0*1.2mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 2.2uh 20%, IDC=1.8A, Dcr=0.084mΩ , Size: 2.5*2.0*1.0mm, Phone Accessories~

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 4.7uh 20%, IDC~1.5A, Dcr~0.135ohm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor 1.0uh 20%, IDC~ 2.1AMP, Dcr~ 0.065ohm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor, 2.2uh 20%, IDC~1.3AMP, Dcr~0.16ohm

FEATURES,-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withsta

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor, 1.5uh, Temperature Rise Current=23A, Size: 13.8*12.5*5.0mm, DC/DC Converters

FEATURES,-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withsta

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor 1.5uh 20%, Temperature Rise Current~ 9.0AMP, Dcr: 10mohm Max.

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor 4.7uh 20%, Temperature Rise Current~5.5AMP, Size: 6.8*6.8*3.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor 1.5uh 20%, Temperature Rise Current: 4.0AMP, Size: 4.0*4.0*2.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor, 2.2uh 20%, Temperature Rise Current: 3A, Dcr: 58mohm, Size: 4.0*4.0*2.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Power Inductor, 1.5uh 20%, Temperature Rise Current: 15A, Dcr= 5.8mΩ Size: 10*10*4.0mm

FEATURES-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withstan

CHB ELECTRONICS CO., LTD. Send Inquiry

Molding Power Inductor, 4.7uh, Temperature Rise Current: 12A, Size: 13.0*12.0*5.0mm, DC/DC Converters

FEATURES,-Shielded construction-Frequency range up to 3.0-5.0 MHz-Lowest DCR/μH-Handles high transient current spikes without saturation-Ultra low buzz noise, due to composite construction-Encapsulated body offers improved environmentalprotection and moisture resistance.-Higher dielectric withsta

CHB ELECTRONICS CO., LTD. Send Inquiry

DC-DC Converters Inductor 47uh, Rated Current: 0.92A, DC Resistance: 0.3ohm

FEATURES:1, Low profile,low RDC, high current handing capacities2,Magnetically shielded structure that ensures the high-density mounting configurations3, Flat bottom surfaces ensures secure, reliable mounting4,Provided in embossed carrier tape packaging for use with automatic mounting machinesAPPLIC

CHB ELECTRONICS CO., LTD. Send Inquiry

DC-DC Converters Inductor 100uh, Rated Current: 1.9A, DC Resistance: 77mohm

FEATURES:1, Low profile,low RDC, high current handing capacities2,Magnetically shielded structure that ensures the high-density mounting configurations3, Flat bottom surfaces ensures secure, reliable mounting4,Provided in embossed carrier tape packaging for use with automatic mounting machinesAPPLIC

CHB ELECTRONICS CO., LTD. Send Inquiry

DC-DC Converters Inductor 15uh, Rated Current: 1.9A, DC Resistance: 77mohm

FEATURES:1, Low profile,low RDC, high current handing capacities2,Magnetically shielded structure that ensures the high-density mounting configurations3, Flat bottom surfaces ensures secure, reliable mounting4,Provided in embossed carrier tape packaging for use with automatic mounting machinesAPPLIC

CHB ELECTRONICS CO., LTD. Send Inquiry

DC-DC Converters Inductor 2.2uh, Rated Current: 2.9A, DC Resistance: 32mohm

FEATURES:1, Low profile,low RDC, high current handing capacities2,Magnetically shielded structure that ensures the high-density mounting configurations3, Flat bottom surfaces ensures secure, reliable mounting4,Provided in embossed carrier tape packaging for use with automatic mounting machinesAPPLIC

CHB ELECTRONICS CO., LTD. Send Inquiry

DC-DC Converters Inductor 4.7uh, Rated Current: 2.0A, DC Resistance: 60mohm

FEATURES:1, Low profile,low RDC, high current handing capacities2,Magnetically shielded structure that ensures the high-density mounting configurations3, Flat bottom surfaces ensures secure, reliable mounting4,Provided in embossed carrier tape packaging for use with automatic mounting machinesAPPLIC

CHB ELECTRONICS CO., LTD. Send Inquiry