| Prod Model: |
S1100 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Color: |
White |
| Application: |
General Transducer |
| Output Type: |
Triple |
| Principle Of Work: |
V/F Control Transducer |
| Switch Mode: |
PWM Control |
| Main Circuit Type: |
Current |
| Brand: |
Sanch |
Product Description
Torque controller
Specifications:
1) Rated voltage: 220V / single phase, 220V / three phase, 440V / three phase
2) Power range: 0.75 ~ 22kW
3) Output frequency: 1.0 ~ 400Hz
Features:
1) High-performance low-noise
2) Automatic torque compensation
3) RS-485 in-line interface build-in
4) 2-level accelerating / decelerating time
5) Automatic slip compensation, automatic voltage regulation (AVR)
6) 8-level preset table speed
7) Restart after instantaneous power-off
8) All-dimensional protection
| Input Voltage | 220V | 440V |
| Model number: S1100-2T/4T***G | 0.75 | 1.5 | 2.2 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 |
| Output | Applicable motor power (KW) | 0.75 | 1.5 | 2.2 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 |
| Output rated current (A) | 5 | 6.5 | 11 | 3.0 | 4.2 | 5.5 | 8.2 | 13 | 18 | 24 | 32 | 38 | 45 |
| Max output voltage (A) | Input power |
| Over load capacity | 150% of rated output current and run for 65 seconds |
| Power | Phase. Voltage. Frequency | 1-phase/3-phase 200-240V 50/60HZ | 3-phase 380-460V 50/60HZ |
| Allowable variation range of Voltage Frequency | Voltage: ± 15% Frequency: ± 5% |
| Input current (A) | 11/7.4 | 15/10 | 27/15 | 4.2 | 6.0 | 7.2 | 8.5 | 14 | 20.6 | 28 | 30 | 39 | 49 |
| Controlling Characteristics | Control mode | Adopting SVPWM modulating techniques (V/F control and Speed Sensor-less Vector) |
| Output range of frequency | 0.01~400.0Hz |
| Frequency setting analyzing degree | 0.01Hz |
| Output frequency analyzing degree | 0.01Hz |
| PWM load wave frequency | Available to modulate from 2 to 10kHz |
| Torque increase | Auto torque-increase and auto slip compensation at 2 Hz the starting torque can reach 150% of rated torque. |
| Jog frequency | 3 points can be set from 0.01 to 400.0Hz |
| Acceleration/deceleration time | 0.01 to 600.0 seconds. (2 steps of accel/decel time can be set separately. ) |
| Stall Prevention Level | According to the load characteristics of motor, it' s available to be set as 50 to 200% of the rated current of the drive |
| DC braking | Available to be operated from 0.01 to 400.0 Hz from STOP, braking 0 to 100% of the rated current. Starting time 0.0 to-60.0 sec, Stopping time 0.0-60.0 sec |
| Braking torque | 20% (125% shall be available if connected with purchase braking resistor externally) (or 1 to 25HP, equipped within the electric crystals, for 30 HP, braking unit module shall be connected externally. ) |
| V/F curve | V/F curve available to be set |
| Operation characteristics | Frequency setting signal | Digital Operator | Set by UP and DOWN |
| External terminals | 0-10VDC, 4-20mADC, Series Communication Board (RS-485) |
| Running operatisignal | Digital Operator | Available to be operated by RUN, STOP and JOG keys. |
| External terminals | 2 wire styles (Fwd/Stop, Rev/Stop, Run/Stop and Fed/Rev) /3 wire operation, JOG running, Serial Communication Board(RS-485) |
| Intelligent Input Terminal | Switching of 16 step pre-set available speed; Switching of First/Second acceleration/deceleration time; prohibiting acceleration/deceleration and external interrupt input; Jog running UP/DOWN frequency terminal setting; Count terminals |
| Intelligent Output Terminal | During running, frequency agreement output, non-zero count agreement output, over torque output, external interrupt reference. Low voltage detection, operation mode reference, fault output and external fault interruption. |
| Analog signal output | Correspond to actual output frequency or output current. |
| Fault signal contact | Contact of ON at AC motor drive (Relay with one C contact or two open collector output. ) |
| Built-in Function | Setting max/min output frequency; momentary power off restarting; fault restaring; setting of S curve acceleration/deceleration time; auto-voltage stabilizing output modulation; digital frequency output signal; fault records; parameters locking; reset to factory setting; inhibiting reverse run; over current stalling prevention, over voltage stalling prevention, electrical thermal relay. |
| Protection Function | Over current; over voltage, low voltage; external fault interruption input; motor over load; GFF: grounding protection(For optional use); over load of the drive and drive overheating |
| Digital operator | Consisting of 8 functional keys, 7 step LED in 5 digits; 5 status LED indicators. Available to set frequency, display actual output frequency, output current, self-determined unit parameter overview of users, modify settings and for parameter locking, fault displaying. Available to perform running, stop, reset, fwd/rev run and jog run. |
| Environment | Operational Environment temperature | -10° C to +50° C (+40° C ~ +50° C available when the dust cover is removed) |
| Storing temperature | -20° C to + 60° C |
| Installation height | Lower than 1000m, without corrosive gas, fluid and dust. |
| Vibration | Below 20Hz 9.80665m/s² (1g), 20~50 Hz 5.88m/s² (0.6g) |
| Protection degrees | Determined by the installation environment of the end-users. |
Quanzhou Machtric Automation Equipment Co., Ltd., together with three leading enterprises and several affiliated organizations in China and Taiwan has been established to supply "Total Project Solutions" in Industrial Automation.Sanch is geared to integrate the development, manufacture and systems engineering for local and international clients alike.
Our professional teams of engineering, product development, manufacturing and integration staff, devote themselves to the development and application of motor, electric, electronic, microelectronic, information and control technology.
We continue to maintain close co-operation with scientific research institutions both at home and abroad, in order to provide "intelligent" products that not only offer the best solutions, but also have a "humanized" approach to functionality.
At present, our manufacturing capacity is over 100 thousand devices per annum.
This includes products such as:
A/C Frequency Inverters (INVERTER)
Thyristor power controller
Circular knitting machine
Intelligent Control Instruments
Peripheral equipment for Industrial Process Control (IPC)
Microcomputer Controllers for various applications and many others.
In order to service the Chinese market, we have already established dozens of marketing, distribution agents and service organizations, to cover the Northern, Eastern, Central and Southern areas.A Pathway Management System and CRM Customer Relationship Centre with high-efficiency logistic and linkage service has also been established.
SANCH have already applied their range of products and services to the following industries;Textile, dye, ceramic, transportation, building, metallurgy, chemical, light, military ---etc.
SANCH philosophy is to continually improve the electric management platform to account for all facets of applications, thus maximising the competitiveness of technology, quality, service and efficiently in accordance with the principle of satisfying our customers and creating excellent products.
SANCH actively promote a philosophy of, maximising production outputs and yet minimizing energy consumption, using modern technological developments.
Our goal is to achieve "Automation---Energy Saving---Green World", and we will try our best to improve the environment and society as a whole.
