| Prod Model: |
AAAC |
| Application: |
Power Station |
| Voltage: |
High Voltage Cable |
| Current: |
AC Cable |
| Insulation Material: |
Bare |
| Certification: |
SABS |
| Brand: |
Jiapu |
Product Description
LAS ESPECIFICACIONES TECNICAS DEL CONDUCTOR AAAC 120MM2
Product Description
All Aluminum Alloy Conductor (AAAC) Cables
Application of AAAC 120mm2
AAAC is mainly used as bare overhead transmission cable and as primary and secondary
distribution cable. It is also suitable for laying across basins, rivers and valleys where
special geographical teatures exist.
standard of AAAC 120mm2
Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201
-6 standards
Construction of AAAC 120mm2
AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy wires are concentrically
stranded.
This section deals with heat-treatable magnesium silicon type aluminium alloys to the
applicable International Standard, the electrical and mechanical properties of which all
fall within the values suggested by relevant standard. Conductors to all other recognized
specifications can also be supplied. The alloys referred to have higher strength but lower
conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used
to advantage in place of the more conventional ACSR; Having lower breaking loads than
the later, their use becomes particularly favourable when ice and wind loadings are low.
.
ELECTRICAL PROPERTIES of AAAC120mm2
linear Expansivity 23 x10-6 (°C)
| Service conditions |
| Ambient Temperature | -5°C - 50°C |
| Wind Pressure | 80 - 130kg/m2 |
| Seismic Acceleration | 0.12 - 0.05g |
| isokeraunic level | 10 - 18 |
| relative Humidity | 5 - 100% |
Construction Parameters of AAAC 120mm2
DIN 48201 part 6
| Nominal Area | stranding | Overall Diameter | weight | rated strength | Electrical Resistance | Current Rating* |
|
| Nominal | Teorical |
| mm2 | mm2 | No.×mm | mm | Kg/Km | KN | Ω/Km | A |
| 16 | 15.89 | 7/1.70 | 5.1 | 43 | 4.44 | 2.0742 | 78 |
| 25 | 24.25 | 7/2.10 | 6.3 | 66 | 6.77 | 1.3593 | 102 |
| 35 | 34.36 | 7/2.50 | 7.5 | 94 | 9.6 | 0.9591 | 126 |
| 50 | 49.48 | 7/3.00 | 9 | 135 | 13.82 | 0.666 | 158 |
| 50 | 48.35 | 19/1.80 | 9 | 133 | 13.5 | 0.6849 | 156 |
| 70 | 65.81 | 19/2.10 | 10.5 | 181 | 18.38 | 0.5032 | 189 |
| 95 | 93.27 | 19/2.50 | 12.5 | 256 | 26.05 | 0.3551 | 234 |
| 120 | 116.99 | 19/2.80 | 14 | 322 | 32.68 | 0.2831 | 269 |
| 150 | 147.11 | 37/2.25 | 15.8 | 406 | 41.09 | 0.2256 | 309 |
| 185 | 181.62 | 37/2.50 | 17.5 | 500 | 50.73 | 0.1828 | 352 |
| 240 | 242.54 | 61/2.25 | 20.3 | 670 | 67.74 | 0.1371 | 420 |
| 300 | 299.43 | 61/2.50 | 22.5 | 827 | 83.63 | 0.111 | 477 |
| 400 | 400.14 | 61/2.89 | 26 | 1104 | 111.76 | 0.0831 | 568 |
| 500 | 499.83 | 61/3.23 | 29.1 | 1379 | 139.6 | 0.0665 | 649 |
| 625* | 626.2 | 91/2.96 | 32.6 | 1732 | 174.9 | 0.0531 | 742 |
| 800* | 802.09 | 91/3.35 | 36.9 | 2218 | 224.02 | 0.0415 | 857 |
| 1000* | 999.71 | 91/3.74 | 41.1 | 2767 | 279.22 | 0.0333 | 971 |
(*)Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.
Bonnie Wang (Ms)
Marketing Manager
Henan Jiapu Cable Co.,Ltd
Add: No 18 Building, No 283 Xisanhuan Road, Zhengzhou, China
Direct Tel: +86-371-6866 5329 Ext.611
Phone number:0086-13598073108
Henan Jiapu Cable Group is located in Zhengzhou, the capital of Henan province, also politics, culture, economic and transport center. The group has 3 subsidiary companies which specialize in manufacturing and supplying various kinds of wires & cables. With more than 15 years of efforts and development, it has become an influential manufacturer of wires & cables making machinery in China.
The main products are as follows:
Bare Conductor (AAC, AAAC, ACSR, ACAR, AACSR, ACSR/AW)
Aerial Bundled Cable 1kV-35kV (ABC Cable)
PVC Insulated (Flexible ) Wire and PVC Insulated and Sheathed (Armoured) Power Cable
Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable
Welding Cable, Control Cable, Rubber Sheathed Cable
Fiber Optic Cable (OPGW, ADSS, etc. )
Fittings and Accessories (Suspension set, tension set, insulators, vibration dampers, joint box, terminal set, lightning arrester, etc. )
We can design and manufacture wires & cables according to the standards of GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Our products have been widely supplied to power utilities, electrical materials distributors and dealers, construction and engineering firms, electrical contractors or industrial companies all over the world, as well as Africa, Middle East, South-east Asia, South America, Central America, North America, Europe, Australia and so on. Welcome your OEM and ODM orders.
We are working hard all the time to improve the production lines, develop new products, focus on customer's needs, and try our best to offer the best professional services, strive to meet the customers' needs. We pursue the aim of "quality, reputation and service first" and adhere to the trade principals of "equality and mutual benefits". We win the trust of domestic customers and customers of different countries. We will take the enterprise spirit of "Unity and Striving, Reality and Innovating, Pioneering and Progressing, Honesty and Being Law-abiding". And we will cordially cooperate with friends of various circles both at home and abroad with a new gesture.
