Capg Type Bimetal Pallel Groove Clamps Aluminium Copper Connectors
| Price: |
US $ 1/Piece |
| Min Order: |
100/Piece |
| Pay Type: |
L/C,T/T,D/P |
| Prod Model: |
CAPG |
| Application: |
Automobile |
Product Description
| Material: | Aluminium And Copper Bimetal | Bolts: | DIN 933 Steel 8.8, Dacromatized Or Hot-galvanize |
|---|
| Nuts: | DIN 933 Steel 8.8, Dacromatized Or Hot-galvanize | Washer: | Dacromatized Or Hot-galvanize |
|---|
| Qty For Bolts: | 1pcs Or 2pcs Or 3pcs | OEM: | Accept |
|---|
Aluminium Copper Connectors CAPG type Bimetal Pallel Groove Clamps
| |
| Application | Features and benefits |
For bare overhead aluminium or copper
tap conductors. | Bodies in high strength aluminum
alloy(AIMgSi) or electrolitic copper | Uniformity of material
Long term elasticity
Corrosion withstand |
| Description | Pressure pad | Uniform pressure along the clamp |
Parallel groove clamps are mainly used
for transmitting current between the
interconnected conductors, for example
for connection loops on terminal poles or
tapping off bus-bars to equipment on
substations. From this function it is
therefore obvious that the electrical
conducting properties and the corrosion
resistance are the main factors for
consideration in the design. Besides this
main area of application parallel groove
clamps are also used for safety loops
and therefore they must provide an
adequate mechanical holding strength.
If conductors made of different materials
are to be connected this can be done by
using bimetallic tubes.
This range of connectors is designed to
connect two paralell conductors in order
to do a derivation of a secondary
conductor, or to close a loop of one
conductor to fit it on an insulator. These
connectors are composed of two parts :
Upper body and lower body, they have
two paralell grooves to receive the
conductor(s).One, two or three bolts are
passing throught the bodies between the
grooves. In aluminium clamps, the two
bodies are made out of high strength
aluminium alloy. In copper clamps, the
bodies are made out of high strength
electrolitic copper. In bimetallic clamps,
the two bodies are made out of high
strength aluminium alloy, and to tight
a copper conductor, one groove is made
with allumiunm alloy and welded by hot
forged bimetallic sheet . The bolts are
made out of hard steel (8.8) and
Dacromatized.
To warranty a reliable tightening,
a pressure pad and a spring washer
are inserted under the bolt head. | Spring washers | Maintain the pressure even if a
temperature change causes dilatation |
| Dacromatized steel bolt 8.8 | High permanent strength
applied on the clamp |
Hot forged compressedbimetalic
sheet (in bimetallic clamps) | Good electrical contact without corrosion |
| Ridged grooves (forged type only) | Improve mechanical pullout strength
and electrical contact |
| Holding strength | An adequate mechanical holding
strength is achieved. In case of higher
values two or more PG-clamps should
be used in series. |
| Corona | Good corona and radio interference
voltage (RIV) behavior due to
rounded shapes. |
| Corrosion resistance | Maximum corrosion resistance is
achieved by using a clamp material that
matches with that of the conductor,
for example a corrosion-resistant AlMgSi
alloy for conductors made of aluminium,
al-alloy etc. |
The requirements will be fulfilled and demonstrated by heat cycle tests.
Overhead Lines |
Option
Can be equipped of shearhead bolts. | |
| |
Description :
The aluminium clamp with a friction welded copper insert clearly marked in blue for making copper conductor connections.
The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and utilise belleville washers to prevent thermal ratcheting under cyclic loads.Interface between aluminium clamp body and tap copper shape is protected.The clamps are coated with an oxide inhibitor.And hot-dip galvinized steel bolts and nuts was on requirment,also we can change to stainless bolts and nuts with washers.
Material:
Body:High strength corrosion resistant aluminium and copper-alloy
Bolts: DIN 933, steel, 8.8, Dacromatized
Nuts: DIN 934, steel, Dacromatized. pressed into lower clamp body
Spring DIN 127, steel, Dacromatized
washers: Dacromatized.
| cat no | Type | Conductor Range | No./Size
of Bolts |
| Aluminium Run | Copper Tap | |
| mm2 | O.D | mm2 | O.D | |
CU2.5-10AL16-70-1
CU6-50AL16-70-1
CU6-50AL16-70-2
CU6-50AL16-70-3
CU6-50AL25-150-1
CU2.5-10AL25-95-2
CU6-35AL25-95-2
CU6-35AL35-120-2
CU25-150AL35-120-2
CU10-95AL25-150-2
CU10-95AL25-150-3
CU16-185AL35-200-2
CU16-185AL35-185-3
CU35-200AL35-200-3
CU35-240AL50-300-2
CU35-240AL35-300-3 | F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T
F/T | 16-70
16-70
16-70
16-70
25-150
25-95
25-95
35-120
35-120
25-150
25-150
35-200
35-185
35-200
50-300
35-300 | 5.1-11.7
5.1-11.7
5.1-11.7
5.1-11.7
6.3-15.7
6.3-12.5
6.3-12.5
7.5-14.0
7.5-14.0
6.3-15.7
6.3-15.7
7.5-18.4
7.5-17.5
7.5-18.4
9.0-23.0
7.5-22.5 | 2.5-10
6-50
6-50
6-50
6-50
2.5-10
6-35
6-35
25-150
10-95
10-95
16-185
16-185
35-200
35-240
35-240 | 1.8-4.1
2.7-9.0
2.7-9.0
2.7-9.0
2.7-9.0
1.8-4.1
2.7-7.5
2.7-7.5
6.3-15.7
4.1-12.5
4.1-12.5
5.1-17.5
5.1-17.5
7.5-18.4
7.5-20.3
7.5-20.3 | 1 X M8
1 X M8
2 X M8
3 X M8
1 X M8
2 X M8
2 X M8
2 X M8
2 X M8
2 X M8
3 X M8
2 X M8
3 X M8
3 X M8
2 X M8
3 X M8 |
Options: F-X-G
·F(ex. CAPG16-70F): Shear head screw
·X(ex. CAPG16-70X...): Stainless steel screws.
·G(ex. CAPG16-70G.): Hot-dip galvanized steel screws.
Note:
1. Type: F = Forged body; T = Transverse groove
2. that the clamp is provided with corrosionproof stainless steel screws and
hot-dip galvanized steel screws instead of dacromet screws. add suffix "X"
for stainless steel screw. Add suffix "G" for hot dip galvanized steel screws.
Tag:
parallel groove clamps,
bimetallic connectors
Zhongrui Electric Co., Ltd. Located at Chinese Electric City'-Yueqing City, established 2000, own advanced manufacturing machines and complete measuring & testing equipments. We are a high technical enterprise that have succeed in turning produce, develop and sell together, one of the professional manufacturer for silicone rubber insulator in China, the member of Chinese Electrical Equipment Industry Association, one unit of National standard and technical committee of insulator, Yueqing city valuing contracts & promising enterprise, ISO2000: 2008 International Quality System Attestation enterprise, and established long-term cooperating relationship with the relevant scientific research institutions.
Our company specializes in the series products of composite insulator (power line, substation and electric railway series), composite dry wall bushing, lightning arrester and fuse cutout etc. All products are qualified by Ministry of Power Industry electric equipment quality inspection center and National Insulator & Lightning Arrester quality control test of inspection center, agreed with National industrial, IEC AND ANSI standard, and accreditation through State Power Corporation and China Machinery Industry Federation 'Two Ministry' new product and Zhejiang Province Scientific & Technological Hall, Province Electric Power Industry Bureau, Province Mechanical Industry Bureau federation authentication of new products of scientific & technical results. Product quality is insured by People's Insurance Company of China. Series of composite insulators and Zinc Oxide Arrester manufactured by our company, sharing the features of advanced design, reasonable structure, reliable performance, that achieve to the national leading level. Our silicone Rubber insulator used on high-voltage line had been placed 'National Star plan' by Chinese Technical department, Composite Cross-arm Insulator had been honored City Technical Metal; And we are the first private enterprise that got KEMA test report for Composite Insulator and Arrester in China. Our products sell well through all parts of the country, as well as finding good markets in Iran, Indonesia, Vietnam, Kampuchea, Syrian, Korean, Canada etc., gaining favorable comments of domestic and abroad users.
We can designand produce all type composite Insulators as per user's requirement. Warmly welcome old and new customers visit our company. We try our best to develop the best products at highvoltage products basic with "toward excellence for creditable brand"
ZONRI company will go ahead together with you and cooperate with you in sincerely.
More >
Other Products with This Manufacturers
