Free Software GPS Tracker with Magnet and Waterproof for Vehicle with 4400mAh Battery T4400

Fast guide to test the tracker

Step 1. Get a active SIM card with both GSM SMS and GPRS data service.
Make sure the SIM card can send SMS and have GPRS function;

Step 2. Insert the SIM card, and make sure install the over properly.
Because only when you install the cover, then the screw will be fit strongly and the device will have power supply.

Step 3. Check Installation.
Call the tracker SIM card, and see whether it's with signal. If it can ring, but won't pick up the phone, it means the SIM card is with signal, and you can go next.

Step 4. Set the APN.
It's very important. Eg, your APN is internet, and no login user and password, then you just need send :*APN*internet* (don't allow cap letter here!)(it will reply to you whenever the APN command is wrong or correct. However, only when you set the right APN, it can be combined with our web platform. Therefore, if you didn't get any reply, then please kindly check whether your SIM card is with active GPRS or GSM SMS service, or whether your sim card is fit well.

Step 5. Set the master number.
It's very important also. The right command is:*master*123456*+45XXXX*,eg, if you use your own mobile phone is 004511111111,thenthe master command will be: *master*123456*+4511111111*

Step 6. Login into web tracking platform.
After set the right apn and master number, then you can go to our web platform: www.miitown.com input the master number and password to login in.

Please pay attention, default password is 123456, user start with country code 00.Eg,00451111111,not +4511111111 .At this step, if you set APN correctly,then you could see your gps device location now.
AT the same time, you can send *locateaddress* and your phone will receive the detailed address include street name.