| Prod Model: |
EDR-120-24 |
| Output Voltage: |
24VDC |
| Output Voltage Range: |
24 to 28VDC |
| Output Current: |
5A |
| Output Power1: |
120W |
| Output Type: |
Single |
| Warranty: |
1 Year |
| Output Power: |
1 - 50W |
| Input Voltage: |
220V |
| Starting Mode: |
Separate-excited Switching Power Supply |
| Power Supplying System: |
Level 1 Power Distribution Equipment |
| Certification: |
FCC |
| Connection Mode: |
Switching Power Supply |
| Voltage Regulating Mode: |
Switch Power Supply |
| Brand: |
Meanwell |
Product Description
Mean well 24V 120W din rail power supply Meanwell EDR-120-24
EDR-120-24 Short Brief:
Meanwell NDR-120-48 is a 48V 120W din rail power supply
Mean well EDR-120-24 Features:
- Meanwell 24V 120W Power Supply
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage / Over temperture
- Cooling by free air convection
- Can be installed on DIN rail TS-35 / 7.5 or 15
- U508(industrial control equipment) approved
- EN61000-6-2(EN-50082-2) industrial immunity level
- 100% full load burn-in test
- 2 years warranty
Meanwell EDR-120-24 Specification:
| MODEL | EDR-120-24 |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 5A |
| RATEDPOWER | 120W |
| RIPPLE & NOISE (max.) | 80MVP-P |
| VOLTAGE ADJ.RANGE | 12 ~14V |
| VOLTAGE TOLERANCE | ±2.0% |
| LINEREGULATION | ±0.5% |
| LOADREGULATION | ±1.0% |
| SETUP, RISE TIME | 1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 16ms / 230VAC 10ms / 115VAC at full load |
| INPUT | VOLTAGERANGE | 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC / L(+) ,AC / L(-)] |
| FREQUENCYRANGE | 47 ~ 63Hz |
| EFFICIENCY (Typ.) | 87.5% |
| AC CURRENT (Typ.) | 2.25A / 115VAC 1.3A / 230VAC |
| INRUSH CURRENT (Typ.) | 20A / 115VAC 35A / 230VAC |
| LEAKAGE CURRENT | <1mA / 240VAC |
| PROTECTION | OVERLOAD | 105 ~ 130% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 14 ~ 17V |
| Protection type : Shut down o/p voltage, re-power on to recover |
| ENVIRONMENT | WORKING TEMP | -20 ~ +60°C (Refer to "Derating Curve") |
| WORKINGHUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP HUMIDITY | -40 ~ +85°C 10 ~ 95%RH |
| TEMPCOEFFICIENT | ±0.03%/°C (0 ~ 55°C) |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
| SAFETY&EMC Note 4) | SAFETY STANDARDS | U508,TUV EN60950-1 appoved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| ISOLATIONRESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70%RH |
| EMC EMISSION | Compliance to EN55022(CISPR22)ClassA, EN61000-3-2,-3 |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2(EN50082-2), heavy industry level, criteria A |
| QTHERS | MTBF | 474.6K hrs min MIL-HDBK-217F(25°C) |
| DIMENSION | 40*125.2*113.5mm (W*H*D) |
| PACKING | 0.6Kg; 20pcs / 13Kg / 1.16CUFT |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is heat source, 15 clearance is recommended. 6. Derating maybe needed under low input voltage. Please check the derating curve for more details. |
Mechanical Specification:
EDR-120-24 Weight: 0.6kg
Dimensions: 40 x 125.2 x 113.5 mmEDR-120-24Mean well 24V 120W din rail power supply Meanwell EDR-120-24
Notes:
1. We will ship the item in 3-5 work days after the payment arrive.
2. We will usually ship the item to Worldwide by FedEx/ UPS/DHL.
3. Buyer's responsibility to pay customs fees, duties, import taxes, shipping charge
And related charges.
4. We accept the payment through T/T, Paypal, and Western Union.
5. The pictures show you one of the items in stock. But the exact one may be sold before your bidding. So it may not the exact one which you will recieve.
EATOP Industrial Limited offers a high quality and high reliability AC/DC and DC/DC power supplies. We specialize in low to MID-range power (1 - 600 watts), also Industrial, Telecom, Rectifier Module and Healthcare Power Supplies from 1W-4000 Watts.
Our Switch Mode AC/DC line consists of Desktop and Wall mount adaptors, as well as Metal Enclosed and Open Frame type power supplies with wide range Universal inputs of 85VAC to 264VAC.
Our DC/DC line consists of Output Power Range of 5 watts to 600 watts with input ranges of wide Range input (2: 1) as well as Ultra Wide Range Input (4: 1)
If you have any projects that are in need for AC/DC switching power supplies and/or DC/DC converters, we would be happy to supply you with a quote.
EATOP main product line:
1. Eaton Power Supply
2. Emerson power Supply
3. Delta power Supply
4. Vapel Power Supply
5. Mean Well LED Power Supply
