| Prod Model: |
HRP-450-24 |
| Output Voltage: |
24VDC |
| Output Voltage Range: |
21.6 to 28.8VDC |
| Output Current: |
18.8A |
| Output Power1: |
451.2W |
| Output Type: |
Single |
| Warranty: |
1 Year |
| Output Power: |
401 - 500W |
| Input Voltage: |
220V |
| Starting Mode: |
Separate-excited Switching Power Supply |
| Power Supplying System: |
Level 1 Power Distribution Equipment |
| Certification: |
FCC |
| Connection Mode: |
Switching Power Supply |
| Voltage Regulating Mode: |
Switch Power Supply |
| Brand: |
Meanwell |
Product Description
Mean well 24V 450W PFC AC DC Power Supply Meanwell HRP-450-24
HRP-450-24 Short Brief:
Meanwell HRP-450-24 is a 24V 450W PFC AC DC Power Supply
Mean well HRP-450-24 Features:
1) Universal AC input / Full range
2) Built-in active PFC function, PF>0.95
3) High efficiency up to 89.5%
4) Withstand 300VAC surge input for 5 seconds
5) Protections: Short circuit / Overload / Over voltage / Over temperature
6) Built-in constant current limiting circuit
7) Built-in cooling Fan ON-OFF control
8) Built-in DC OK Singal
9) Built-in remote sense function
Meanwell HRP-450-24 Specification:
| MODEL | HRP-450-15 | HRP-450-24 | HRP-450-36 | HRP-450-48 |
| OUTPUT | DC VOLTAGE | 15V | 24V | 36V | 48V |
| RATED CURRENT | 30A | 18.8A | 12.5A | 9.5A |
| CURRENT RANGE | 0 ~ 30A | 0 ~ 18.8A | 0 ~ 12.5A | 0 ~ 9.5A |
| RATED POWER | 450W | 451.2W | 450W | 456W |
| RIPPLE & NOISE (max.) | 150mVp-p | 150mVp-p | 240mVp-p | 240mVp-p |
| VOLTAGE ADJ. RANGE | 13.5 ~ 18V | 21.6 ~ 28.8V | 28.8 ~ 39.6V | 40.8 ~ 55.2V |
| VOLTAGE TOLERANCE | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE TIME | 1000ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load |
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF>0.95/230VAC PF>0.99/115VAC at full load |
| EFFICIENCY (Typ.) | 89% | 88% | 89% | 89.5% |
| AC CURRENT (Typ.) | 5A/115VAC 2.4A/230VAC |
| INRUSH CURRENT(Typ.) | 35A/115VAC 70A/230VAC |
| LEAKAGE CURRENT | <1.5mA / 240VAC |
| PROTECTION | OVER LOAD | 105 ~ 135% rated output power |
| Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 18.8 ~ 21.8V | 30 ~ 34.8V | 41.4 ~ 48.6V | 57.6 ~ 67.2V |
| Protection type : Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE (OPTIONAL) | 90°C ± 5°C (70°C ± 5°C 5V only) (TSW1 : detect on heatsink of power transistor) ;90°C ± 5°C (TSW2 : detect on heatsink of power doide) |
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
| FUNCTION | DC OK SIGNAL | PSU turns on : 3.3 ~ 5.6V ; PSU turns off : 0 ~ 1V |
| FAN CONTROL (Typ.) | Load 20±10% or RTH2 ≥50°C Fan on |
| ENVIRONMENT | WORKING TEMP. | -40 ~ +70°C (Refer to derating curve) |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85°C , 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) |
| VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY & EMC | SAFETY STANDARDS | U60950-1, TUV EN60950-1 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH |
| EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024 , EN61000-6-2, heavy industry level, criteria A , |
| OTHERS | MTBF | 139.9K hrs min. MIL-HDBK-217F (25°C ) |
| DIMENSION | 218*105*41mm (L*W*H) |
| PACKING | 1.19Kg; 12pcs/15.3Kg/0.82CUFT |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies."
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. |
HRP-450-24 Weight: 1.19kg
Dimensions: 218 x 105 x 41 mmHRP-450-24Mean well 24V 450W PFC AC DC Power Supply Meanwell HRP-450-24
Notes:
1. We will ship the item in 3-5 work days after the payment arrive.
2. We will usually ship the item to Worldwide by FedEx/ UPS/DHL.
3. Buyer's responsibility to pay customs fees, duties, import taxes, shipping charge
And related charges.
4. We accept the payment through T/T, Paypal, and Western Union.
5. The pictures show you one of the items in stock. But the exact one may be sold before your bidding. So it may not the exact one which you will recieve.
EATOP Industrial Limited offers a high quality and high reliability AC/DC and DC/DC power supplies. We specialize in low to MID-range power (1 - 600 watts), also Industrial, Telecom, Rectifier Module and Healthcare Power Supplies from 1W-4000 Watts.
Our Switch Mode AC/DC line consists of Desktop and Wall mount adaptors, as well as Metal Enclosed and Open Frame type power supplies with wide range Universal inputs of 85VAC to 264VAC.
Our DC/DC line consists of Output Power Range of 5 watts to 600 watts with input ranges of wide Range input (2: 1) as well as Ultra Wide Range Input (4: 1)
If you have any projects that are in need for AC/DC switching power supplies and/or DC/DC converters, we would be happy to supply you with a quote.
EATOP main product line:
1. Eaton Power Supply
2. Emerson power Supply
3. Delta power Supply
4. Vapel Power Supply
5. Mean Well LED Power Supply
