| Prod Model: |
S2800 |
| Product Name: |
AC-DC-AC Motor Speed Controller |
| Control Mehtod: |
V/F;Vector Control Wihtout Pg |
| Voltage Range: |
330-440V |
| Power Range: |
7.5-110kw |
| Output Frequency Range: |
0.1-600Hz |
| Output Current: |
2.5A-210A |
| Protection: |
IP20 |
| Certificate: |
Ce;ISO9001 |
| PWM Carrier Frequency: |
Adjust From 0.5-15kHz |
| Features: |
Energy Saving;Eco-Friendly |
| Application: |
High Frequency Converter Transducer |
| Output Type: |
Triple |
| Principle Of Work: |
V/F Control Transducer |
| Switch Mode: |
PWM Control |
| Main Circuit Type: |
Voltage |
| Brand: |
Machtric |
Product Description
S2800 380V Drive Inverter AC-DC-AC Motor Speed Controller
Product description
| controlling Characteristics | Control mode | V/F control Vector control without PG |
| Output range of frequency | 0.01~600.0Hz |
| Frequency setting analyzing degree | 0.01Hz |
| Output frequency analyzing degree | 0.01Hz |
| PWM load wave frequency | Available to modulate from 0.5 to 15 kHz |
| Torque increase | Vector control without PG:0.5Hz/150%(SVC) |
| Jog frequency | 3 points can be set from 0.01 to 600.0Hz |
| Acceleration/deceleration time | 0.01 to 3600.0 seconds. (Acceleration /deceleration time in 2 phases can be set separately) |
| Stall Prevention Level | According to the load characteristics of motor, it' s available to be set as 100% to 200% of the rated current of the drive |
| DC braking | braking 0 to 150% of the rated current. Starting time 0.0 to-50.0 sec, Stopping time 0.0-50.0 sec |
| Braking torque | 20% (125% shall be available if connected with purchase braking resistor externally) (1-25HP braking resistor is installed inside;30HP can connect externally with brake unit module) |
| speed regulation ratio | Vector control without PG:1:100 |
| Operation characteristics | Frequency setting signal | Digital Operator | Set by UP and DOWN |
| External terminals | 0-10VDC, 4-20mADC, Series Communication Board (RS-485) |
| Operation Signal | Digital Operator | Available to be operated by RUN, STOP and JOG keys. |
| External terminals | 2 wire styles (Fwd/Stop, Rev/Stop, Run/Stop and Fed/Rev) /3 wire operation, JOG running, Serial Communication Board(RS-485) |
| Intelligent Input Terminal | Speed shift can be preset in 8th phase ;the first/second acceleration and deceleration time shift: prohibition of acceleration and deceleration ;external interrupt ;inching operation ;increasing/decreasing frequency setting terminal |
| Intelligent Output Terminal | During running, frequency arrival and output , , non-zero count agreement output, over torque output, external interrupt reference. Low voltage detection, operation mode reference, fault output and external fault interruption. |
| Analog signal output | Correspond to actual output frequency or output current. |
| Fault signal contact | For ac drive failure ,the contact is "on"(a relay with "c" contactor a open-collector output |
| Built-in Function | Upper and lower limits setting of output frequency, instantaneous restart for abnormal malfunction, automatic voltage output regulation ,anomaly records ,parameter hold ,parameters reset to the factory defaults ,prohibition of reversion ,over-current stall prevention ,over-voltage stall prevention ,electronic thermal relay |
| Protection Function | Protection of inverter unit phase ,accelerated over-current, decelerated over-current, constant-speed over-voltage, bus under-voltage failure, motor overload ,inverter overload ,open -phase at output side (75KW+models ),rectification modules overheating, overheating fault of inverter module ,external fault ,communication fault ,current detection fault ,motor self-learning fault ,EEPROM operational fault ,PID feedback disconnection fault, braking unit fault |
| Digital operator | Consisting of 8 functional keys, 7 step LED in 5 digits; 5 status LED indicators. Available to set frequency, display actual output frequency, output current, self-determined unit parameter overview of users, modify settings and for parameter locking, fault displaying. Available to perform running, stop, reset, fwd/rev run and jog run. |
| Environment | Operational Environment temperature | -10° C to +50° C (+40° C ~ +50° C available when the dust cover is removed) |
| Storing temperature | -20° C to + 60° C |
| Installation height | Lower than 1000m, without corrosive gas, fluid and dust. |
| Vibration | Below 20Hz 9.80665m/s² (1g), 20~50 Hz 5.88m/s² (0.6g) |
| Protection degrees | IP20 (Determined by the installation environment of the end-users.) |
Advantages:
-Heavy loading without PG
-Three phases/ 380-440V, 7.5-110kw
-Output frequency: 0.01-600hz
-Multifunctional
Functions and Features:
-Intelligent input terminal
-Intelligent output terminal
-Built-in function
-Protection funtion
-Safety self-checking function
-Standby display function
-V/F curve setup control / Vector control function
-Function of automatic fault detection and recording
-Wobble frequency function
Why Choose Us?
20 years experience at produce frequency inverter
10 years OEM experience for customers
Products sold for more than 40 countries
After-sales responding within 24 hours
One to one pre-sales consulting services
Factory located in Shanghai, with high-tech professional engineer teams.
Contact me
Contact person:Maggie Huang
Moblie:86-18650771915
Website: www.machtric.com
Quanzhou Machtric Automation Equipment Co., Ltd., together with three leading enterprises and several affiliated organizations in China and Taiwan has been established to supply "Total Project Solutions" in Industrial Automation.Sanch is geared to integrate the development, manufacture and systems engineering for local and international clients alike.
Our professional teams of engineering, product development, manufacturing and integration staff, devote themselves to the development and application of motor, electric, electronic, microelectronic, information and control technology.
We continue to maintain close co-operation with scientific research institutions both at home and abroad, in order to provide "intelligent" products that not only offer the best solutions, but also have a "humanized" approach to functionality.
At present, our manufacturing capacity is over 100 thousand devices per annum.
This includes products such as:
A/C Frequency Inverters (INVERTER)
Thyristor power controller
Circular knitting machine
Intelligent Control Instruments
Peripheral equipment for Industrial Process Control (IPC)
Microcomputer Controllers for various applications and many others.
In order to service the Chinese market, we have already established dozens of marketing, distribution agents and service organizations, to cover the Northern, Eastern, Central and Southern areas.A Pathway Management System and CRM Customer Relationship Centre with high-efficiency logistic and linkage service has also been established.
SANCH have already applied their range of products and services to the following industries;Textile, dye, ceramic, transportation, building, metallurgy, chemical, light, military ---etc.
SANCH philosophy is to continually improve the electric management platform to account for all facets of applications, thus maximising the competitiveness of technology, quality, service and efficiently in accordance with the principle of satisfying our customers and creating excellent products.
SANCH actively promote a philosophy of, maximising production outputs and yet minimizing energy consumption, using modern technological developments.
Our goal is to achieve "Automation---Energy Saving---Green World", and we will try our best to improve the environment and society as a whole.
