Hot Searches: variable frequency inverter GPS Tracker

Z-Wave Wall Mounted Outlet Built-in Power Meter (ZWP32)

Name: Z-Wave Wall Mounted Outlet Built-in Power Meter (ZWP32)
Brand: all-electronics-online.com
SKU: 819967775
Availability: InStock
Rating: 4.7 (51 reviews)

Price:	US $ 17-50/Piece
Min Order:	1/Piece
Pay Type:	L/C,T/T,D/P,Western Union,Paypal

Contact Supplier

Showroom Product Company Profile

Prod Model:	ZWP32
Operating Voltage:	120VAC/60Hz
Maximum Load:	Incandescent, 600W; Maximum, 120 VAC.
Metering:	Electrical Power Load in W;Electrical Power Work I
Range:	Min 30m Line of Sight
Dimensions:	115(L)70(W)44(H)mm
Net Weight:	150g
Frequency:	908.2MHz
Certificate:	FCC/UL/cUL/Z-Wave Plus
Grounding:	Self Grounding
Type:	Without Switch
Application:	Residential/General-Purpose
IP Rating:	IP20
Color:	White
Certification:	FCC
Customized:	Customized
Condition:	New

Product Description

Z-wave Wall Mounted Outlet Built-in Power Meter(ZWP32)

Introduction
This ZW32 Duplex Receptacle is designed to work with other Z-WAVE enabled devices.
Z-WAVE nodes of other types can be Included in the system and will also act as repeaters.
This is useful when the device would otherwise be out of the radio range of the wireless controller.
The top outlet is active and the bottom is controlled through Z-wave or through the manual button on the outlet as is typical for a Z-wave outlet.

Technical data

Installation
1. Before installation ensure that the voltage supply is disconnected.
2. Connect ZW32 module as shown on above diagram.
3. Connect the device in accordance with the wiring diagram presented in Wiring diagram. Switch on 120V of the mains voltage.
4. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW32 to your controller. To get in the "Add" mode, the distance between ZW32 module and controller is suggested to be in one meter. Quickly pressing the learn switch of ZW32 three times for 1 second at least & release to be included.
5. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW32 from your controller. Press the learn switch of ZW32 three times for 1 second at least & release to be excluded.

Shipping &Packing

NIE-TECH Co., Ltd founded in 2009, is a Hi-tech manufacturer that specializes in smart-home products' design, development and manufacture.

We own the experienced and innovative R&D team, and has a full range of successful Z-Wave solution for both home and industrial applications. Our wide range of wireless technologies, which earned us great confidence from our customers for their reliability and range performance, help our customers turn their innovative ideas into successful products.

Our ZE300 Evalogik Gateway is the nerve centre of smart home. It allows you to gain access to and control different appliances and devices installed in your home by using your smartphone. ZE300 Evalogik gateway that can be remotely controlled range from lightings, sensors, curtain motors, security cameras and energy control units. All you need to do is configure the Gateway with your home's Wi-Fi network and install the EVALOGIK APP on your smartphone. You can then add and connect to all appliances compatible with the EVALOGIK gateway.

With the aim of "quality first, customer first", our QC team ensures the products are qualified before shipping. Low-cost, short leading time, high quality, and our rigorous working attitude, all of these are helping us to get more orders.

Anyhow, looking forward to cooperating with you as biz partner in any terms.