| Prod Model: |
CTS7-216-1AH34-1B24 |
| Net Weight: |
0.4kg |
| Task: |
Program |
| Structure: |
Combination |
| Signal: |
Continuous |
| Function: |
Automatic Control |
| Certification: |
CE |
| Condition: |
New |
| Customized: |
Customized |
Product Description
Product Description
1,14 DI×24VDC,transistor output
2,24VDC power supply, 1 PPI, 2 Freeport
3,72KB Program Memory, 110KB Data Memory.External battery and memory card.
4,Integrated linear interpolation,circular interpolation function
| Physical features |
| Size(W*H*D) | 137×80×62mm |
| Power dissipation | 9W |
| Memory Features |
| Program Memory | 24KB, expandable to 72KB |
| Data Memory | 10KB, expandable to 110KB |
| Super capacitors | about 112 hours (typical) |
| External battery(optional) | about 200 days (typical) |
| General Features |
Timers total
1ms
10ms
100ms | 256
4
16
236 |
| Counters Total | 256( backup by super capacitor) |
| Internal memory bits | 256(backup by super capacitor) |
| Stored permanently on power down | 112 |
| Time interrupts | 2 with 1ms resolution |
| Edge interrupts | 4 rising edges and/or 4 falling edges |
| Analog adjustments | 2 with 8 bit resolution |
| Boolean execution speed | 0.15µs |
| Float execution speed | 8µs |
| Clock | embedded |
| Integrated Communication Function |
| Communication interface | 5 3 communication port, PORT0:PPI,RS485 PWL, FPORT0/FPORT1:Freeport RS485 |
| PPI baud rates | 9.6, 19.2 and 187.5k |
| Freeport baud rates | 1.2kbaud to 115.2k |
Maximum cable length per segment
Isolated repeater applied
Isolated repeater unapplied |
When it is 1000 m, baud rate is 187.5k; when it is 1200 m, 38.4k.
50 m |
| Maximum number of stations | 32 stations per segment,126 stations per network |
| Maximum number of masters | 32 |
| Point to point (PPI Mater Mode) | Yes(NWTR/NETW), 8 total, 2 reserved |
| I/O Features |
| Number of integrated digital inputs | 14 |
| Input type | Sink/Source |
| Number of integrated digital outputs | 10 |
| Output type | Solid State----MOSFET, external load common anode connection |
| Digital I/O map area | 256(128 input/128 output) |
| Analog I/O map area | 64(32 input/32 output) |
| Maximum number of expandable I/O modules | 7 |
| Maximum number of digital I/O | 230 |
| Maximum number of analog I/O | 56AI/28AO |
| Pulse catch inputs | 14 |
| Pulse output | 4 axis×200KHz( do not support PLS output in the software package, co-trust software package is a must) |
High-speed counters
total
Single phase counters
two phase counters |
6
6×200KHz
4×200KHz |
| Digital Input Features |
| Number of integrated digital input | 14 |
| Input type | Sink/Source(IEC Type 1 sink) |
| Rated voltage | 24V DC(B series),5V DC(A series) |
| Maximum continuous permissible voltage | 30V DC |
| Surge voltage | 35VDC last 0.5s |
Logical 1 Signal (minimum)
Logical 0 Signal (Maximum ) | above 16 VDC except
above 15 VD(I1.1,I1.5)
below 8 VDC (except I1.1,I1.5)
below 5 VDC(I1.1,I1.5) |
Isolation( field side and logical circuit)
Optical isolation(Galvanic)
Isolation group | yes
500V AC,1minute
refer to the Terminal Identification |
| Simultaneous Input | 14 |
Maximum cable length
Shielded
Unshielded |
500 m(ordinary standard input)
300 m(ordinary standard input) |
| Digital Output Features |
| Number of integrated digital output | 10 |
| Output type | Solid state - MOSFET(source ) external load common anode connection |
| Rated voltage | 24V DC |
| Output range of voltage | 5V to 28.8 VDC |
Logical 1 Signal (maximum)
Logical 0 Signal (minimum) | 0.5V
Vcc minus 0.5 V |
Maximum rated current of each point
Maximum rated current of each common port
Leakage current (Max)
Surge current (Max) | 0.5A
4 A
10μA
8A,100ms |
| Lamp load (Max) | 3.5 W |
| On- state resistance | 0.3 ohm typical (Max :0.6 ohm ) |
Isolation(field side to logical circuit)
Optical isolation(Galvanic)
Isolation groups | yes
500V AC, 1 minute
refer to the Terminal Identification |
Delay (Max)
Off to on/ on to off |
0.2us(Q0.0~ Q0.7),50us(Q1.0 and Q1.1) |
| Pulse frequency(Max) | 2 axis:200KHz(Q0.0~Q0.3),1 KHz(Q0.4~Q1.1)
4axis:200KHz(Q0.0~Q0.7),1 KHz(Q0.4~Q1.1) |
| Simultaneous output | 10 |
| Parallel Output | No |
Maximum cable length
Shielded
Unshielded |
500 m(ordinary standard input)
150 m(ordinary standard input) |
Shenzhen CO-TRUST Technology Co., Ltd founded in 2003, is dedicated to R&D, manufacturing and sales of industrial automation control products. As a high-tech enterprise, COTRUST provides a wide business coverage of intelligent equipment & robot, new energy vehicles, industrial Internet. Main products include PLC, Motion control&servo drive, HMI, Dedicated control system and automation software MagicWorks PLC/HMI/TUNER.
