Primary Ud Cable, Power Cable, 8 Kv, Al/Tr-XLPE/Neutral/PVC (AEIC CS 8/ICEA S-94-649)

Prod Model:	Primary UD Cable
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Manufacture Standard:	Aeic CS 8/Icea S-94-649
Rated Voltage:	8 Kv
Size Range:	2-1000 AWG or Kcmil
Insulation Level:	100%
Neutral Level:	1/3 or Full
Neutral Type:	Copper Wire
Size Of Neutral:	14/12/10/9 AWG
Voltage:	Low and Medium Voltage Cable
Current:	DC Cable
Insulation Material:	XLPE
Certification:	CCC
Wire Core Material:	Aluminum 1350
Model:	Primary Ud Cable
Brand:	Boan

Product Description

Primary UD Cable, 8 KV, AL/TR-XLPE/Neutral/PVC (AEIC CS 8/ICEA S-94-649)
Applications:
Predominantly used for primary underground distribution; Suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 15, 000 volts or less and at conductor temperatures not to exceed 90° C for normal operation.

Specifications:
Primary UD Cable meets or exceeds the following ASTM specifications:
B-3 Soft Annealed Copper Wire.
B-8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft.
B-230 Aluminum, 1350-H19 Wire for Electrical Purposes.
B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
B-609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes.
Primary UD Cable is manufactured to the latest edition of the following specifications, and in case of specification conflicts, in the order listed:
ANSI/ICEA S-94-649
AEIC CS-8
RUS U-1

Construction:
The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy. The cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield. Conductors are available with either 100% or 133% insulation levels. A concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield. The cable is identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket. A semi-conducting polyethylene jacket is available upon request.

Maximum Conductor Normal Operation: - 90O C;
Emergency Overload: - 130O C
Temperatures: Short Circuit - 250 C
Application: Medium voltage power cable for single phase underground distribution (UD), including getaway systems in low profile substations.

Size AWG or kcmil	Number of Strands	Nominal OD Over Insulation in	1/3 Neutral					Full Neutral
			Number of Wires	Size AWG	Jacket Thickness mil	Approximate Outside Diameter in	Approximate Net Weight lb/kft	Number of Wires	Size AWG	Jacket Thickness mil	Approximate Outside Diameter in	Approximate Net Weight lb/kft
Aluminum 100% Insulation Level (115 mil)
2	7	0.55	6	14	80	0.92	393	10	14	80	0.92	447
1	19	0.59	6	14	80	0.96	424	13	14	80	0.96	518
1/0	19	0.63	6	14	80	1.00	461	16	14	80	1.00	595
2/0	19	0.68	7	14	80	1.05	520	13	12	80	1.08	708
3/0	19	0.73	9	14	80	1.10	600	16	12	80	1.13	825
4/0	19	0.78	11	14	80	1.15	693	13	10	80	1.23	998
250	37	0.84	13	14	80	1.21	778	16	10	80	1.29	1158
350	37	0.94	18	14	80	1.31	983	16	9	80	1.41	1440
500	37	1.07	16	12	80	1.50	1307	29	10	80	1.54	1954
750	61	1.27	15	10	110	1.81	1927	-	-	-	-	-
1000	61	1.42	16	9	110	1.98	2419	-	-	-	-	-