Home >> Manufacturers Directory>> Transformer

>> Potential Transformer

Voltage Transformer Potential Transformers 10kv 35kv 17.5kv 40.5kv 110kv 252kv

1.10KV-40.5 voltage transformer:epoxy resin cast vacuum structure, with phase A and C in series connection to two instrument transformers separately. It is suitable for indoor power system of 10KV and below for voltage, current and energy measuring. It is of three phase "V" connection with two full-

Ningbo Ville Electric Co., Ltd.

Epoxy Resin Cast Semi-Closing Structure Voltage Transformer (JSZF-11G) PT

JSZF-11G voltage transformer:11kv Indoor Three-Phase (phase-phase, double-pole) PT or Voltage Transformer/Vt/PTGeneral:This if of epoxy resin cast semi-closing structure, suitable for indoor power system of 10KV and below. Frequency 50Hz. It can be used for metering and relay protecion. It has anti

Ningbo Ville Electric Co., Ltd.

Panel Short-Circuit and Ground Fault Indicator

Summarize:The fault indicator of seriesCSM-EKL was combined with short-circuit fault sensor, displayequipment and transmission cable / cable and ground fault sensor, series CSM-EKL was designed for the automatic monitoring of the power grid system, which Mainly applicable to 10KV and below high-volt

Guangzhou Ruihu Electric Co., Ltd.

Outdoor Capacitor Voltage Transformer

Capacitor voltage transformer series products are suitable for current, electric energy measurement and relay protectionin a system with effectively earthed neutral with rated voltage 35kV, 66kV, 110kV or 220kV and rated frequency 50Hz. It can also be used for carrier wave communication concurrently

Ningbo Ville Electric Co., Ltd.

Disconnector 252kv

Disconnectorapplicationthree phase AC 50hz outdoor HV electrical apparatus,for switching under no-load condition and electrical disconnecting between electrical apparatus and live circuit in rated voltage 35-220kv power system.standard:IEC 62271-102 sf6 load break switch ApplicationOur products incl

Ningbo Ville Electric Co., Ltd.

Distribution Transformer Three Phase Enclosed Distribution Transformer with Wound-Core

General:S11-M. R Three Phase Enclosed Distribution Transformer with wound-core is applicable to 10kV, 6kV transmission and distribution system for distribution, power supply and lighting in industrial, agricultural, mineral and petrochemical fields. Compared with series S9, 30% of no-load loss and 7

Ningbo Ville Electric Co., Ltd.

SZ9 On-Load Tap Changer Power Transformer

SZ9 On-Load Tap Changer Power TransformerSZ9 Transformers are mainly used for carry current:A.Stability of the load center voltage power grid in order to improve power supply quality;B.As a liaison between the two networks transformers, distribution networks to use a set divided between the load;C.F

Minyang Group Co., Ltd.

Gas Insulation Metal-Clad Switchgear Gis

It is composed by circuit breaker, DS/ES, FES, current transformer, PT, lightning arrester, busbar, DSG or CSG etc. It adopts the technology of three phases in one box, three positions isolation earth and full aluminium alloy enclosure. The characteristic of ZFW-126/T2500-40 is flexible and convenie

Ningbo Ville Electric Co., Ltd.

Dry Type High Power Transformer

leave an inquiry to know more details about Price,Packing,Shipping and Discount.Features:1.Products available: High power transformers with capacity up to 300kVA, high current reactors, magnetism products and inductance winding.2. Transformer: High-B material, outstanding design, low temperature ris

Wenzhou Modern Group Co., Ltd.

>> Potential Transformer

Manufacturers Directory

Popular Sourcing