Product Description
Pure sine wave inverter/charger 1KW-6KW
1. High overload ability of charger is up to 300% rated power(20 sec.).2. pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).3. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.4. It has 15s delay before transfer when AC resumes, and overload protection when pure sine wave inverter equips with generator.5. 10ms typical transfer time between battery and AC, which guarantees power continuity of charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.6. charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.8. LCD status display, battery/AC priority switch, USB communication port are available for pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.Note:*For 1KW one. **For some models.
| Inverter Output | Continuous Output Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W |
| Surge Rating(20s) | 3000W | 4500W | 6000W | 9000W | 12000W | 15000W | 18000W |
| Capable of Starting Electric Motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
| Nominal Efficiency | >88%(Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.0 |
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50/60Hz ± 0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
| Typical transfer Time | 10ms(Max) |
| THD | < 10% |
| DC Input | Nominal Input Voltage | 12.0Vdc |
| ( *2 for 24Vdc, *4 for 48Vdc) |
| Minimum Start Voltage | 10.0Vdc |
| Low Battery Alarm | 10.5Vdc / 11.0Vdc |
| Low Battery Trip | 10.0Vdc / 10.5Vdc |
| High Voltage Alarm & Fault | 16.0Vdc |
| High DC Input Recovery | 15.5Vdc |
| Low Battery voltage recover | 13.0Vdc |
| Idle Consumption-Search Mode | < 25 W when Power Saver On |
| Charge | Input Voltage Range | Wide: 90~135VAC / 164~243VAC;
Narraw: 100~135VAC / 194~243VAC; |
| Output Voltage | Depends on battery type |
| Charger Breaker Rating | 10A | 10A | 10A | 20A | 20A | 30A | 30A |
| Max Charge Rate | 35A / 70-90A Max (Charger Current Control) |
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
Charger curve(4 stage constant current)
4 step digital controlled progressive charge | Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
| Battery type | Fast Vdc | Float Vdc |
| Gel U.S.A | 14.0 | 13.7 |
| A.G.M 1 | 14.1 | 13.4 |
| A.G.M 2 | 14.6 | 13.7 |
| Sealed Lead Acid | 14.4 | 13.6 |
| Gel Euro | 14.4 | 13.8 |
| Open Lead Acid | 14.8 | 13.3 |
| Calcium | 15.1 | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional |
| Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 120Vac | 230Vac |
| Low Voltage Trip | 80V/90V±4% | 184V/154V±4% |
| Low Voltage re engage | 90V/100V±4% | 194V/164V±4% |
| High Voltage Trip | 140V±4% | 253V±4% |
| High Voltage re engage | 135V±4% | 243V±4% |
| Max Input AC Voltage | 150VAC | 270VAC |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| | | | | | | | |
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
| High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating | 10A | 15A | 20A | 30A | 30A | 40A | 40A |
| Transfer switch rating | 30amp for UL & TUV | 40amp for UL |
| Max bypass current | 30amp | 40amp |
| Mechanical Specification | Mounting | Wall mount |
| Inverter Dimensions(L*W*H) | 382*218*179mm | 442*218*179mm | 598*218*179mm |
| Inverter Weight | 16KG | 17KG | 20KG | 24KG | 35KG | 45KG | 45KG |
| Shipping Dimensions(L*W*H) | 520*315*300mm | 580*315*300mm | 740*315*300mm |
| Shipping Weight | 18KG | 19KG | 22KG | 26KG | 37KG | 47KG | 47KG |
| Display | Status LEDs / Status LEDs+LCD |
| Standard Warranty | 1 Year |
Our company supplies High frequency power inverter, Uninterrupter power supply, Solar inverter&controller, Industrial switch power supply, LED switch power supply, Power adapter ect. Which apply to solar power, wind power, electric power, lighting appliance ect. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
