>> Composite Insulator

High Quality Porcelain Line Post Insulator (SG-P-10)

High Quality Porcelain Line Post Insulator (SG-P-10)Post insulatorsMaterial: PorcelainANSI classType57-15Creepage distancemm1145Dry arcing distancemm438Cantilever strengthKN12.5Power frequency flashover voltageDryKV175WetKV150Critical impulse flashover voltagePositiveKV290Negative380Radio interferen

Minyang Group Co., Ltd. Send Inquiry

33KV Pin Type Insulator (PW-33-Y)

33KV Pin Type Insulator (PW-33-Y)Pin Type Insulator for High voltage LineIt can be ordered up to thecustomer's requirementsCat.NoA1062A1063A1064A1065Fig1234Class BSPw-11-YPw-22-YPw-33-YPQ-36YMain Dimensions mmH185255320h52.6352.6352.6352.63D170205240d767676D127.7827.7827.78R1161616R2161616Nominal V

Minyang Group Co., Ltd. Send Inquiry

Composite Pin Insulators

Composite Pin Insulators are mainly used in high voltage overhead power transmission &distribution lines for insulation and mechanical connection.Normal Operation Conditions:1 Ambient temperature: -50C-+50C2 Altitude: not more than 3000m3 Frequency: not more than 100HzTechnical Specification:Type

Zhejiang Haivo Electrical Co., Ltd. Send Inquiry

Long Rod Suspension Composite Insulator

•Good electrical specification, strong mechanical strength, tensile bending intension of the epoxy glass fiber rod of internal load bearing is double than normal rolled products, 8-10 times of high strength porcelain material, can effectively improve the reliable of safe operation.•Fine

Chongqing Ziyong Technology Co., Ltd. Send Inquiry

Higher Tensile Strength Polymer Composite Insulator

This product is suitable for high voltage line facilities,technical reform of city network,pollutedarea,power facilities,line use,highvoltage linehard jumper,high voltage transmission lines,high speed railway and city light rail traffic construction,etc.BasicDataTypeNo.OfSheds"X"Lengthinches(mm)Diam

Chongqing Ziyong Technology Co., Ltd. Send Inquiry

High Voltage Post Porcelain Insulator

Line Post Composite InsulatorANSI 57 series high voltage porcelain line post insulator An insulator is a material or method that restricts the transfer of either heat or electricity. In the case of heat, thermal insulators work by reducing the rate heat can travel through a space. Generally, they us

Chongqing Ziyong Technology Co., Ltd. Send Inquiry

Silicon Rubber 12.5kn 52kv Pin Post Insulator

The main technique parameter of Pin Insulator:1. all tests are in accordance with IEC611092. maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage3. all units for 220kv 230kv system voltage should be assembled one corona ring at the line

Chongqing Ziyong Technology Co., Ltd. Send Inquiry

66kv Suspension Type Composite (Synthetic, Polymer, Silicone) Insulator

* Rated voltage: 66KV;* Mechanical bending strength range from 70KN;* Advise model No or supply drawing when enquire;* Synthetic insulator, composite insulator*** We have got CE, RoHS, VDE, UL certificate for different products. Welcome to send inquiry to us, we hope to build a win-win business with

Fuzhou Colmate Electric Co., Ltd. Send Inquiry

70kn - 100kn High Voltage Polymer Suspension Type Insulator

*In comply with IEC/NEMA/BS etc standard*Mechanical bending strength range from 70KN to 100KN*Advise Model No or supply drawing when enquire*Synthetic insulator, composite insulator, suspension insulator------------------------------------------------About usFuzhou Colmate Electric Co., Ltd, was est

Fuzhou Colmate Electric Co., Ltd. Send Inquiry

Composite Insulator Pin Type (CIW-24/70)

*In comply with IEC/NEMA/BS etc standard*Mechanical bending strength range from 70KN to 100KN*Advise model No or supply drawing when enquire*Synthetic insulator, composite insulatorBesides to the captioned product, we also manfucture & supply the following product:ClassificationProduct NameInsulator

Fuzhou Colmate Electric Co., Ltd. Send Inquiry

Polymeric Suspension Insulator

*In comply with IEC/NEMA/BS etc standard*Mechanical bending strength range from 70KN to 100KN*Advise model No or supply drawing when enquire*Synthetic insulator, composite insulatorBesides to the captioned product, we also manfucture & supply the following product:ClassificationProduct NameInsulator

Fuzhou Colmate Electric Co., Ltd. Send Inquiry

Composite Insulator for Electric-Railway

The products are suitable for electric-railway of complex operation conditions, can effectively prevent flash accidents and decrease the times of clear and maintenance. Because of small volume, and when in the small clear headway of tunnel, the products of porcelain, glass insulator cannot instead o

Zhong Rui Electric Co., Ltd. Send Inquiry

Composite Cross Arm Insulator (110KV)

Product Name: 110kV 10KN Composite cross-arm InsulatorModel: FS-110/10Manufacture and test Standard: IEC, ANSI, GBMaterials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DIP galvanized cast steel for metal fittingsKey Specifications/Special F

Zhong Rui Electric Co., Ltd. Send Inquiry

Composite Cross Arm Insulator (FSW type) 110kv

Product Name: 110kV 10KN Composite cross-arm InsulatorModel: FSW-110/10Manufacture and test Standard: IEC, ANSI, GBMaterials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DIP galvanized cast steel for metal fittingsKey Specifications/Special

Zhong Rui Electric Co., Ltd. Send Inquiry

Post Insulator 220kv

Product Name: 220kV 10KN Composite post InsulatorManufacture and test Standard: IEC, ANSI, GBCertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1210Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DIP

Zhong Rui Electric Co., Ltd. Send Inquiry

Post Insulator 66kv

Product Name: 66kV 8KN Composite post InsulatorManufacture and test Standard: IEC, ANSI, GBCertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1210Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DIP g

Zhong Rui Electric Co., Ltd. Send Inquiry

Post Insulator 24kv

Product Name: 24kV 6-8KN Composite post InsulatorManufacture and test Standard: IEC, ANSI, GBCertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1210Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DIP

Zhong Rui Electric Co., Ltd. Send Inquiry

Post Insulator 10-15kv

Product Name: 10-15kV 4KN Composite post InsulatorManufacture and test Standard: IEC, ANSI, GBCertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1210Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resin rod (ECR type) for core3) Hop DI

Zhong Rui Electric Co., Ltd. Send Inquiry

Suspension Insulator with Large Sheds 110-132kv 100-160kn

Product Name: 110-132kV 100-160KN Composite Tension /Suspension InsulatorModel: FXBW4-110/100Manufacture and test Standard: IEC 61109, ANSICertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1209Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced

Zhong Rui Electric Co., Ltd. Send Inquiry

Suspension Insulator 35kv 70kn

Product Name: 35kV 70KN Composite Tension / Suspension InsulatorModel: FXBW4-35/70Manufacture and test Standard: IEC 61109, ANSICertification Agent: KEMA Nederland B. V. -T&D Testing ServicesCertificate Number: 07-1209Materials:1) Silicon Rubber for sheds/ housing2) Glass-fiber reinforced epoxy resi

Zhong Rui Electric Co., Ltd. Send Inquiry